With this all-too-common washing machine problem, the basin has been drained of water, but it refuses to spin. Spinning at a high rate of speed is the action that squeezes water out of the clothing so that it can be dried in the dryer.

1. 
   

   Redistribute the Clothing

   Try to reorganize the clothing within the washer tub. When the washer is out of balance, it will shut off until you can balance the laundry again. Rearrange the clothing and then shut the lid. If the load distribution is proper, the machine ought to begin spinning on its own. High-absorption items like towels, sheets, and bulky apparel like trousers and sweaters frequently cause loads to become unbalanced.

   
2. 
   

   Make Sure the Machine Is Level

   Verify the machine’s floor level. Your clothes’ washer is programmed to stop spinning when a machine is out of level for safety. Use a bubble level to check the machine’s level, and then adjust the legs to level it out again. In the event that this is unsuccessful, you might need to level the floor again or install a level platform beneath the washer.

   
3. 
   

   Ensure Proper Drainage

   Verify the drain line and drainage system. The machine’s drainage system could become clogged with small objects. It might be possible to examine the washer’s drain pump without taking it apart. The drainage hose connecting the machine’s back to a drainage point may also be blocked.

   

4. Fixing a Washing Machine That Makes Loud Noises

   One of the more annoying washing machine problems is when the washer makes thumping, grinding, or trunking noises during the agitation or spin cycles. Repair this problem as soon as possible, since this kind of movement can damage the washer and create new problems. Washing machine repair Dubai

   1. 
      

      Consider Lubricating or Replacing the Tub Bearings

      The tub bearings, which are found directly underneath the tub, could need to be replaced since they are worn out. The tub bearings may require lubrication (grease) if the washing machine is squeaking.

      
   2. 
      

      Check the Belts

      The drive belt or pulley for the washing machine motor could be worn out. In order to access the motor in this repair, a sizable portion of the machine must be disassembled. The pump pulley belt may be damaged in some other way, such as being cracked or frayed. The belt frequently also has a burning rubber odor.

      

      Fixing a Washing Machine That Fills With Water But Will Not Drain

      Lifting the lid of the washing machine only to find garments floating in a pool of murky gray water is a common household nightmare. When you first start the machine, the water is either hot or lukewarm.

      1. 
         

         Look for Clogs

         The pump in your machine can be obstructed by a piece of clothing or another washing-related object. With a kitchen measuring cup, drain the water, then unplug the appliance. Remove the front panel’s screws. For simpler access, tilt the machine up and support the front with bricks or 2x4s. It may be simple to see the pump housing on your machine, making it possible to determine whether the pump is clogged. If so, gently twist the obstruction from the pump with pliers.

         
      2. 
         

         Check the Tube

         In addition, the corrugated tubing leading to the pump may have a blockage. Open the tube’s clamp. Due to the fact that this tube will be filled with water, have a bucket or container handy. Remove the water. The end of the hose is typically where a blockage will be found if there is one. Use pliers or your hands to remove it.

         

      When to Call a Professional

      Fixing your washing machine can be very difficult, and only an appliance repair professional can diagnose the problem, and obtain and install the correct parts. Any action you take could potentially put more stress on the machine and damage more parts. Code errors could mean something simple, or it could mean you need a new sensor. What you think are minor squeaks are actually internal malfunctions or damaged mechanisms that need replacing. Call a reputable appliance repair specialist who handles all types of washing machines, but don’t make the mistake of calling a plumber who specializes in repairing water supply pipes and drains. 045864033