Why do you need Rufus tool for Windows 10?

Want to install a fresh copy of  Windows 10 on your computer? Then you will use a USB drive to launch the setup and continue with the installation process. However, you may know that the device has UEFI instead of BIOS to use the right media for the firmware type to finish the installation successfully. On Windows 10, there are many ways to create a bootable USB drive. But I recommend you use the Rufus tool for Windows 10 to easily create a USB drive to install Windows with support for UEFI.

A brief introduction about what is Rufus

Rufus comes as a free lightweight tool to create a bootable USB flash drive to install Windows 10 on your PC. In previous versions, you have to provide the ISO image file to make a bootable USB drive, but with the latest update, you can simply download the ISO file and create a bootable USB drive within just a few seconds. 

It can be especially helpful when, 

• You create a USB installation media from bootable ISOs 
• You require to work on a system that accomplishes an OS installed
• You need to flash a BIOS or different firmware from DOS
• You want to run a low-level utility

Why should you use this amazing tool?

If your job involves spending countless hours in front of a computer, creating an emergency kit is essential. By having a basic set of Windows utilities at your fingertips, you can quickly resolve any issues that prevent the operating system from working properly and interrupt work.

Also, your version of Windows should have a bootable USB in case you need to quickly reinstall the operating system. We couldn’t think of a better software application than the Rufus tool for Windows 10.

Rufus comes with both basic and advanced options that allow you to format USB drives and add bootable or non-bootable media to them. So use this incredible boot creator to create a Windows 10 UEFI bootable USB drive from ISO.

Explore the impressive features of this boot tool

Rufus is free software that doesn’t require any installations. To better understand this smart software, here is the best Rufus 2023 download for Windows features. 

• Rufus is the best tool to create a bootable USB drive using an ISO image file. It supports various bootable files like Linux distributions, raw disk image files, and Windows installation ISO files. 
• You can use Rufus to download the ISO image of Windows 10 computers.
• It also allows users to create a fully DOS-compatible environment to run legacy tools using FreeDOS and the MBR partition scheme.
• It supports two partitioning schemes (MBR and GPT) for users who want to create bootable media from ISO images.
• Rufus tool for Windows 10 provides advanced boot options including Syslinux 6.04, Syslinux 4.07, ReactOS, Grub4DOS 0.4.6a, Grub 2.04, and UEFI: NTFS.
• Rufus allows users to format their USB drives to FAT, FAT32, NTFS, exFAT, UDF, and ReFS file systems, set group sizes, and change volume labels.

In a word, this software is an ISO burner mainly to easily format and create bootable USB or Live USB with ISO files.

System Requirements of Rufus

To create a bootable USB drive from Rufus, you need the following prerequisites.

• Windows 10 or a later version (32-bit or 64-bit) 
• USB flash drive of at least 8GB
• The latest version of Rufus

How to use the Rufus tool for Windows 10 to create a bootable USB drive

To use Rufus Windows 10 download and create a bootable media, connect your USB flash drive to the computer, and follow the below steps. 

1. Download Rufus for Windows 10 latest version and launch it
2. Click the Settings button at the bottom of the page, find “Check for Updates”, and select the Daily option there.
3. Now close the window and open Rufus again.
4. In the Device section, select your USB drive to create install media.
5. In the “Boot selection” option, click the Disk or ISO image option.
6. Select Windows 10 from the Download option and select the ISO image file you want to download. 
7. Choose the Release, Edition, Language, and Architecture, and click the Download button.
8. Select the location to save the Windows 10 ISO image file automatically.
9. If you want to create a bootable USB drive, then continue with the default settings.
10. Click the START button to begin the procedure. 

Once the process is over, you can use the bootable USB drive to install Windows 10 on your computer. 

Is Rufus safe to use?

The answer is YES. This amazing boot tool is completely free for all users. As long as you download and use this tool in the correct way, you don’t have to worry about malware or virus attacks by this application.

Is Rufus Free to Use?

Yes, Rufus comes as a completely free tool for all users. It can be used for personal and commercial purposes. It’s not only freeware, it is open-source software too. So you can download Rufus 10 Windows for free and create bootable USB drives. 

The latest version of Rufus and what’s new?

The latest version of Rufus is version 3.21 and it was released on November 28, 2022. It comes with many amazing features that you need to use the Rufus tool for Windows 10 or later. 

• Allow arbitrary local account usernames in the Windows User Experience dialog.
• Enhance Windows version Reports from ISO/.wim.
• Update NTFS driver for UEFI: NTFS to v1.4 and exFAT driver to v1.9
• Switch to non-standard GRUB remote download.
• Fix the wrong detection of GRUB with nonstandard prefixes.
• Solve GRUB supports for arch and deactivates, and much more.

Summing up the article

In brief, the Rufus tool for Windows 10 and later is the best application to create a bootable USB drive. So you can use Rufus to install the Windows operating system on your computer. It also has the facility to drive formatting so you do not have to do it manually. So what’s more? This is the best way to create a bootable USB drive on the computer. It is free and does not need any installations.